Small but uncompromising
Best in design,
Most sealing and most practical
| SKU | Description | Base dimensions | Spacing for parts |
| TB-11810 | sumi level 15 | 18.8X18.8 cm | 15X15 cm |
| TB-11811 | sumi level 20 | 23.8X23.8 cm |
20X20 cm |
Customization on request
Covert drain with polyurethane square base and a deck that can be converted into direct connection. Peripheral sheet
DRY50 that is heat-glued to the base of the surface. For showers with 4 gradients.
Upper view of the canal base
 |
1. Canal bracket with DRY5 sealing sheet |
 |
2. Deck includes odor filter and hair trap |
 |
3. Key for cleaning |
Also suitable for balconies
Direct adapter included in kit
Installation guide
1. Position of the base and accurate marking of the drain.
2. Connecting the drain, the pipe should have a gradient greater than or equal to 2%. Make sure the water drains well. The cement base must be filled, note the height measured before and that there is sufficient space suitable for the channel.
3. When the cement dries, apply a thin layer of tile adhesive S1 / S2 over the top, as well as the back of the grouted surface (double adhesive).
4. Adjust the channel and check that the notched layer is completely straight. The sheet should be folded before the gradients are created.
5. Preparing the gradients. The flat part of the bounded layer boundary will determine the starting point.
6. Preparing the gradients. The flat part of the bounded layer boundary will determine the starting point.
7. Check that the sealing sheet is well tensioned, the air bubbles must be completely removed with the spoon.
8. Apply ceramic glue.
9. Check that the sealing sheet is well stretched and the air bubbles must be completely removed with the spoon.
10. We recommend covering the walls with the sealing sheet DRY50 (not included).
